Telecom Services Information Services home
Spacer

Setup Instructions for CS55 Headset for 9630/9608 Phones

  1. Unplug the short cord from the headset dock and set aside.

  2. Plug the control cord into the headset port on the bottom of the 9600 series phone.

  3. Plug the other end of the control cord into the headset dock where the short cord was previously located.

  4. Plug the headphone pin into the headphone jack on the base of the headset dock.

  5. (Optional step for ring detection functionality) Plug the ring detector into the headphone jack on the cord itself.
  6. (Optional step for ring detection functionality) Remove the protective cover from the ring detector and stick it to the speaker under the handset on the phone. It is not permenant and can be removed.
  7. Plug the power cable into the base of the headset dock and plug adapter into wall.

To answer a call or get dial tone press the headset button once.

To disconnect press the headset button a second time.

To adjust the volume push the volume switch on the headset up to increase the volume and down to decrease it.

To mute the headset push the volume switch in, there will be 3 rapid beeps indicating the headset is muted.